I mistakenly added files to Git using the command:
git add myfile.txt
I have not yet run git commit
. How do I undo this so that these changes will not be included in the commit?
git reset <file>
That will remove the file from the current index (the "about to be committed" list) without changing anything else.
git reset
In old versions of Git, the above commands are equivalent to git reset HEAD <file>
and git reset HEAD
respectively, and will fail if HEAD
is undefined (because you haven't yet made any commits in your repository) or ambiguous (because you created a branch called HEAD
, which is a stupid thing that you shouldn't do). This was changed in Git 1.8.2, though, so in modern versions of Git you can use the commands above even prior to making your first commit:
"git reset" (without options or parameters) used to error out when you do not have any commits in your history, but it now gives you an empty index (to match non-existent commit you are not even on).
Documentation: git reset
git add
overwrote a previous staged uncommited version, we can't recover it. I tried to clarify this in my answer below.
git reset HEAD *.ext
where ext
is the files of the given extension you want to unadd. For me it was *.bmp
& *.zip
Commented
Nov 26, 2013 at 14:25
git rm --cached
) it means you are preparing to make a commit that deletes that file. git reset HEAD <filename>
on the other hand will copy the file from HEAD to the index, so that the next commit won't show any changes being made to that file.
git reset -p
just like git add -p
. This is awesome!
Commented
Jul 17, 2016 at 23:23
git add
you want to recover (61/3AF3...
-> object id 613AF3...
), then git cat-file -p <object-id>
(might be worth it to recover several hours of work but also a lesson to commit more often...)
Commented
Jul 31, 2017 at 14:03
You want:
git rm --cached <added_file_to_undo>
Reasoning:
When I was new to this, I first tried
git reset .
(to undo my entire initial add), only to get this (not so) helpful message:
fatal: Failed to resolve 'HEAD' as a valid ref.
It turns out that this is because the HEAD ref (branch?) doesn't exist until after the first commit. That is, you'll run into the same beginner's problem as me if your workflow, like mine, was something like:
git init
git add .
git status
... lots of crap scrolls by ...
=> Damn, I didn't want to add all of that.
google "undo git add"
=> find Stack Overflow - yay
git reset .
=> fatal: Failed to resolve 'HEAD' as a valid ref.
It further turns out that there's a bug logged against the unhelpfulness of this in the mailing list.
And that the correct solution was right there in the Git status output (which, yes, I glossed over as 'crap)
... # Changes to be committed: # (use "git rm --cached <file>..." to unstage) ...
And the solution indeed is to use git rm --cached FILE
.
Note the warnings elsewhere here - git rm
deletes your local working copy of the file, but not if you use --cached. Here's the result of git help rm
:
--cached Use this option to unstage and remove paths only from the index. Working tree files, whether modified or not, will be left.
I proceed to use
git rm --cached .
to remove everything and start again. Didn't work though, because while add .
is recursive, turns out rm
needs -r
to recurse. Sigh.
git rm -r --cached .
Okay, now I'm back to where I started. Next time I'm going to use -n
to do a dry run and see what will be added:
git add -n .
I zipped up everything to a safe place before trusting git help rm
about the --cached
not destroying anything (and what if I misspelled it).
rm -rf .git
, git init
because I didn't trust git rm --cached
to keep my working copy. It says a little for how git is still overly complex in some places. git unstage
should just be a stock standard command, I don't care if I can add it as an alias.
Commented
Mar 29, 2011 at 3:45
git add
command added new files, but not changes to existing files.
Commented
Apr 10, 2013 at 2:33
If you type:
git status
Git will tell you what is staged, etc., including instructions on how to unstage:
use "git reset HEAD <file>..." to unstage
I find Git does a pretty good job of nudging me to do the right thing in situations like this.
Note: Recent Git versions (1.8.4.x) have changed this message:
(use "git rm --cached <file>..." to unstage)
add
ed file was already being tracked (the add
only saved a new version to the cache - here it will show your message). Elsewhere, if the file was not previously staged, it will display use "git rm --cached <file>..." to unstage
git reset HEAD <file>
one is the only one that will work in case you want to unstage a file delete
Commented
Feb 24, 2018 at 0:25
git restore --staged <file>
. See my answer below for an update.
Commented
Nov 19, 2020 at 17:02
To clarify: git add
moves changes from the current working directory to the staging area (index).
This process is called staging. So the most natural command to stage the changes (changed files) is the obvious one:
git stage
git add
is just an easier-to-type alias for git stage
Pity there is no git unstage
nor git unadd
commands. The relevant one is harder to guess or remember, but it is pretty obvious:
git reset HEAD --
We can easily create an alias for this:
git config --global alias.unadd 'reset HEAD --'
git config --global alias.unstage 'reset HEAD --'
And finally, we have new commands:
git add file1
git stage file2
git unadd file2
git unstage file1
Personally I use even shorter aliases:
git a # For staging
git u # For unstaging
git stage
is the alias for git add
, which is the historic command, both on Git and other SCM. It has been added in december 2008 with commit 11920d28da in the "Git's git repository", if I can say.
git restore --staged path/fo/file
for this purpose.
Commented
Mar 20, 2023 at 14:36
stage
and unstage
only to modify the cache/index/staging area which would be called "staging area" in all documentation and user interface.
Commented
Mar 20, 2023 at 14:39
An addition to the accepted answer, if your mistakenly-added file was huge, you'll probably notice that, even after removing it from the index with 'git reset
', it still seems to occupy space in the .git
directory.
This is nothing to be worried about; the file is indeed still in the repository, but only as a "loose object". It will not be copied to other repositories (via clone, push), and the space will be eventually reclaimed - though perhaps not very soon. If you are anxious, you can run:
git gc --prune=now
Update (what follows is my attempt to clear some confusion that can arise from the most upvoted answers):
So, which is the real undo of git add
?
git reset HEAD <file>
?
or
git rm --cached <file>
?
Strictly speaking, and if I'm not mistaken: none.
git add
cannot be undone - safely, in general.
Let's recall first what git add <file>
actually does:
If <file>
was not previously tracked, git add
adds it to the cache, with its current content.
If <file>
was already tracked, git add
saves the current content (snapshot, version) to the cache. In Git, this action is still called add, (not mere update it), because two different versions (snapshots) of a file are regarded as two different items: hence, we are indeed adding a new item to the cache, to be eventually committed later.
In light of this, the question is slightly ambiguous:
I mistakenly added files using the command...
The OP's scenario seems to be the first one (untracked file), we want the "undo" to remove the file (not just the current contents) from the tracked items. If this is the case, then it's ok to run git rm --cached <file>
.
And we could also run git reset HEAD <file>
. This is in general preferable, because it works in both scenarios: it also does the undo when we wrongly added a version of an already tracked item.
But there are two caveats.
First: There is (as pointed out in the answer) only one scenario in which git reset HEAD
doesn't work, but git rm --cached
does: a new repository (no commits). But, really, this a practically irrelevant case.
Second: Be aware that git reset HEAD
can't magically recover the previously cached file contents, it just resynchronises it from the HEAD. If our misguided git add
overwrote a previous staged uncommitted version, we can't recover it. That's why, strictly speaking, we cannot undo [*].
Example:
$ git init
$ echo "version 1" > file.txt
$ git add file.txt # First add of file.txt
$ git commit -m 'first commit'
$ echo "version 2" > file.txt
$ git add file.txt # Stage (don't commit) "version 2" of file.txt
$ git diff --cached file.txt
-version 1
+version 2
$ echo "version 3" > file.txt
$ git diff file.txt
-version 2
+version 3
$ git add file.txt # Oops we didn't mean this
$ git reset HEAD file.txt # Undo?
$ git diff --cached file.txt # No dif, of course. stage == HEAD
$ git diff file.txt # We have irrevocably lost "version 2"
-version 1
+version 3
Of course, this is not very critical if we just follow the usual lazy workflow of doing 'git add' only for adding new files (case 1), and we update new contents via the commit, git commit -a
command.
* (Edit: the above is practically correct, but still there can be some slightly hackish/convoluted ways for recovering changes that were staged, but not committed and then overwritten - see the comments by Johannes Matokic and iolsmit)
git cat-file
could be used to recover its content.
Commented
Dec 6, 2017 at 13:22
git add
is via git fsck --unreachable
that will list all unreachable obj, which you can then inspect by git show SHA-1_ID
or git fsck --lost-found
that will >Write dangling objects into .git/lost-found/commit/
or .git/lost-found/other/
, depending on type. See also git fsck --help
git add
overwrite a change that was staged but not committed? If I created a file a.txt
and it had '1' as it's content, how can git add
make it have '2' or sth else as it's content? Just looking for an explanation
Commented
Oct 25, 2022 at 13:17
echo 1 > a.txt
followed by git add a.txt
- do not commit yet - echo 2 > a.txt
followed by git add a.txt
; now commit e.g. git commit -m "create unreachable blob"
and run git fsck --unreachable
Undo a file which has already been added is quite easy using Git. For resetting myfile.txt
, which have already been added, use:
git reset HEAD myfile.txt
Explanation:
After you staged unwanted file(s), to undo, you can do git reset
. Head
is head of your file in the local and the last parameter is the name of your file.
I have created the steps in the image below in more details for you, including all steps which may happen in these cases:
Git has commands for every action imaginable, but it needs extensive knowledge to get things right and because of that it is counter-intuitive at best...
What you did before:
git add .
, or git add <file>
.What you want:
Remove the file from the index, but keep it versioned and left with uncommitted changes in working copy:
git reset HEAD <file>
Reset the file to the last state from HEAD, undoing changes and removing them from the index:
# Think `svn revert <file>` IIRC.
git reset HEAD <file>
git checkout <file>
# If you have a `<branch>` named like `<file>`, use:
git checkout -- <file>
This is needed since git reset --hard HEAD
won't work with single files.
Remove <file>
from index and versioning, keeping the un-versioned file with changes in working copy:
git rm --cached <file>
Remove <file>
from working copy and versioning completely:
git rm <file>
reset head
undoes your current changes, but the file is still being monitored by git. rm --cached
takes the file out of versioning, so git no longer checks it for changes (and also removes eventually indexed present changes, told to git by the prior add
), but the changed file will be kept in your working copy, that is in you file folder on the HDD.
git reset HEAD <file>
is temporary - the command will be applied to the next commit only, but git rm --cached <file>
will unstage untill it gets added again with git add <file>
. Also, git rm --cached <file>
means if you push that branch to the remote, anyone pulling the branch will get the file ACTUALLY deleted from their folder.
git rm --cached . -r
will "un-add" everything you've added from your current directory recursively
git reset HEAD <file>
would say fatal: Failed to resolve 'HEAD' as a valid ref.
Commented
Jun 2, 2013 at 3:46
Run
git gui
and remove all the files manually or by selecting all of them and clicking on the unstage from commit button.
git-gui
...." :)
Commented
Aug 1, 2014 at 16:11
The question is not clearly posed. The reason is that git add
has two meanings:
git rm --cached file
.git reset HEAD file
.If in doubt, use
git reset HEAD file
Because it does the expected thing in both cases.
Warning: if you do git rm --cached file
on a file that was modified (a file that existed before in the repository), then the file will be removed on git commit
! It will still exist in your file system, but if anybody else pulls your commit, the file will be deleted from their work tree.
git status
will tell you if the file was a new file or modified:
On branch master
Changes to be committed:
(use "git reset HEAD <file>..." to unstage)
new file: my_new_file.txt
modified: my_modified_file.txt
git rm --cached somefile
. I hope this answer makes its way up the page to a prominent position where it can protect newbies from being misled by all the false claims.
Commented
Oct 30, 2015 at 23:44
As per many of the other answers, you can use git reset
BUT:
I found this great little post that actually adds the Git command (well, an alias) for git unadd
: see git unadd for details or..
Simply,
git config --global alias.unadd "reset HEAD"
Now you can
git unadd foo.txt bar.txt
Alternatively / directly:
git reset HEAD foo.txt bar.txt
git add
before commit? You just git unadd
. This is the real answer 💯
git reset filename.txt
will remove a file named filename.txt
from the current index (also called the “staging area”, which is where changes “about to be committed” are saved), without changing anything else (the working directory is not overwritten).
man git
"Reset, restore and revert", supposedly explains these 3 similar overlapping commands (proliferation of commands indicates poor command structure in the first place), says git reset "changes commit history" yet here it doesn't? It also says git restore "does not update your branch". If nothing is changed what on earth is the command doing? What does "branch" actually mean? And here in your comment what does "anything else" mean? Sometimes people use an assumed context and following the advice can hurt.
As pointed out by others in related questions (see here, here, here, here, here, here, and here), you can now unstage a single file with:
git restore --staged <file>
and unstage all files (from the root of the repo) with:
git restore --staged .
git restore
was introduced in July 2019 and released in version 2.23.
With the --staged
flag, it restores the content of the index (what is asked here).
When running git status
with staged uncommitted file(s), this is now what Git suggests to use to unstage file(s) (instead of git reset HEAD <file>
as it used to prior to v2.23).
git restore --staged .
differs from git reset .
?
Commented
Jan 19, 2022 at 22:52
If you're on your initial commit and you can't use git reset
, just declare "Git bankruptcy" and delete the .git
folder and start over
git add -A && git rm --cached EXCLUDEFILE && git commit -m 'awesome commit'
(This also works when there's no previous commits, re Failed to resolve 'HEAD'
problem)
You can unstage or undo using the git command or GUI Git.
Single file
git reset File.txt
Multiple files
git reset File1.txt File2.txt File3.txt
Suppose you have added Home.js, ListItem.js, Update.js by mistake,
and want to undo/reset =>
git reset src/components/home/Home.js src/components/listItem/ListItem.js src/components/update/Update.js
The same example using Git GUI
git gui
Opens a window. Uncheck your files from Staged changes (will commit)
git restore --staged <file>...
rather than the solution you are giving XD
Use git add -i
to remove just-added files from your upcoming commit. Example:
Adding the file you didn't want:
$ git add foo
$ git status
# On branch master
# Changes to be committed:
# (use "git reset HEAD <file>..." to unstage)
#
# new file: foo
#
# Untracked files:
# (use "git add <file>..." to include in what will be committed)
# [...]#
Going into interactive add to undo your add (the commands typed at git here are "r" (revert), "1" (first entry in the list revert shows), 'return' to drop out of revert mode, and "q" (quit):
$ git add -i
staged unstaged path
1: +1/-0 nothing foo
*** Commands ***
1: [s]tatus 2: [u]pdate 3: [r]evert 4: [a]dd untracked
5: [p]atch 6: [d]iff 7: [q]uit 8: [h]elp
What now> r
staged unstaged path
1: +1/-0 nothing [f]oo
Revert>> 1
staged unstaged path
* 1: +1/-0 nothing [f]oo
Revert>>
note: foo is untracked now.
reverted one path
*** Commands ***
1: [s]tatus 2: [u]pdate 3: [r]evert 4: [a]dd untracked
5: [p]atch 6: [d]iff 7: [q]uit 8: [h]elp
What now> q
Bye.
$
That's it! Here's your proof, showing that "foo" is back on the untracked list:
$ git status
# On branch master
# Untracked files:
# (use "git add <file>..." to include in what will be committed)
# [...]
# foo
nothing added to commit but untracked files present (use "git add" to track)
$
Here's a way to avoid this vexing problem when you start a new project:
git init
.Git makes it really hard to do git reset
if you don't have any commits. If you create a tiny initial commit just for the sake of having one, after that you can git add -A
and git reset
as many times as you want in order to get everything right.
Another advantage of this method is that if you run into line-ending troubles later and need to refresh all your files, it's easy:
autocrlf
value... This won't work in every project, depending the settings.
git reset somefile
and git reset
both work prior to making the first commit, now. This has been the case since several Git releases back.
Commented
Oct 30, 2015 at 23:38
Note that if you fail to specify a revision then you have to include a separator. Example from my console:
git reset <path_to_file>
fatal: ambiguous argument '<path_to_file>': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions
git reset -- <path_to_file>
Unstaged changes after reset:
M <path_to_file>
(Git version 1.7.5.4)
git reset <path>
and it works just fine without a separator. I'm also using git 1.9.0. Maybe it doesn't work in older versions?
Maybe Git has evolved since you posted your question.
$> git --version
git version 1.6.2.1
Now, you can try:
git reset HEAD .
This should be what you are looking for.
To remove new files from the staging area (and only in case of a new file), as suggested above:
git rm --cached FILE
Use rm --cached only for new files accidentally added.
To reset every file in a particular folder (and its subfolders), you can use the following command:
git reset *
Use the *
command to handle multiple files at a time:
git reset HEAD *.prj
git reset HEAD *.bmp
git reset HEAD *gdb*
etc.
.*
or .*.prj
Just type git reset
it will revert back and it is like you never typed git add .
since your last commit. Make sure you have committed before.
Suppose I create a new file, newFile.txt
:
Suppose I add the file accidentally, git add newFile.txt
:
Now I want to undo this add, before commit, git reset newFile.txt
:
For a specific file:
- git reset my_file.txt
- git checkout my_file.txt
For all added files:
- git reset .
- git checkout .
Note: checkout changes the code in the files and moves to the last updated (committed) state. reset doesn't change the codes; it just resets the header.
git reset <file>
and git checkout <file>
.
To undo git add
, use:
git reset filename
git add myfile.txt
# This will add your file into the to-be-committed list
Quite opposite to this command is,
git reset HEAD myfile.txt # This will undo it.
so, you will be in the previous state. Specified will be again in untracked list (previous state).
It will reset your head with that specified file. so, if your head doesn't have it means, it will simply reset it.
There is also interactive mode:
git add -i
Choose option 3 to un add files. In my case I often want to add more than one file, and with interactive mode you can use numbers like this to add files. This will take all but 4: 1, 2, 3, and 5
To choose a sequence, just type 1-5 to take all from 1 to 5.
This command will unstash your changes:
git reset HEAD filename.txt
You can also use
git add -p
to add parts of files.
git reset filename.txt
Will remove a file named filename.txt from the current index, the "about to be committed" area, without changing anything else.
HEAD
orhead
can now use@
in place ofHEAD
instead. See this answer (last section) to learn why you can do that.